The article presents the results of a study of the influence of operating conditions and modes on the technical condition of grain harvesters. The grain harvester gradually loses its performance during operation. To ensure stable operation of the fleet of agricultural machines, maintain its technical condition and increase operational reliability, technical control of grain harvesters is carried out. The analysis of the technical condition of combine harvesters showed that there remains a high percentage of defective combine harvesters, downtime for all types of repairs and the number of unplanned repairs. One of the main reasons for this condition is the low level of organization and quality of technical control, insufficient mechanization of technological processes. The basic element of the technological preparation of repair production is the development of a technological process that ensures the availability of a complete set of technological documentation at the enterprise for organizing and carrying out technical maintenance and repairs of traction rolling stock. During the development of technological processes of repair, the selection of technological operations and means of their technological equipment, normative documents of requirements for tolerances, clearances, forces of landings, pressings, threaded connections, processing quality, assembly accuracy, etc. is carried out. Technical conditions for the development of non-standard technological equipment are determined from the developed technological operations. As a target function, the rational periodicity of maintenance of grain harvesters was taken, namely, the rational time between services. The analysis of the results of known works on mathematical modeling and periodicity of repair and maintenance of complex technical systems based on Markov and semi-Markov processes allowed us to propose complex criteria as criteria for modeling the objective function: the functional of readiness, which is used to estimate the allowable time, and the functional of technical use, which allows determining the value of the optimal time between services of the combine harvester according to the technical parameter at the maximum point
grain harvester, operation, reliability, equipment, technical readiness, technical control
[1] Schultz, C., Lim, W., Khor, S., Neumann, K., Schulz, J., Ansari, O., Skewes, M., & Burton, R. (2020). Consumer and health-related traits of seed from selected commercial and breeding lines of industrial hemp, Hemp sativa L. Journal of Agriculture and Food Research, 2, article number 100025. doi: 10.1016/j.jafr.2020.100025.
[2] Kuzmich, I.M., Rogovskii, I.L., Titova, L.L., & Nadtochiy, O.V. (2021). Research of passage capacity of combine harvesters depending on agrobiological state of bread mass. IOP Conference Series: Earth and Environmental Science, 677, article number 052002. doi: 10.1088/1755-1315/677/5/052002.
[3] Lindström, L.I., Franchini, M.C., & Nolasco, S.M. (2022). Sunflower fruit hullability and structure as affected by genotype, environment and canopy shading. Annals of Applied Biology, 180(3), 338-347. doi: 10.1111/aab.12735.
[4] Aulin, V., Rogovskii, I., Lyashuk, O., Titova, L., Hrynkiv, A., Mironov, D., Volianskyi, M., Rogatynskyi, R., Solomka, O., & Lysenko, S. (2024). Comprehensive assessment of technical condition of vehicles during operation based on Harrington’s desirability function. Eastern-European Journal of Enterprise Technologies, 1(3(127)), 37-46. doi: 10.15587/1729-4061.2024.298567.
[5] Roik, V. (2022). Structure of the national police of Ukraine: Modern interpretation. Entrepreneurship, Economy and Law, 5, 69-74. doi: 10.32849/2663-5313/2022.5.11.
[6] Rogovskii, I., Sivak, I., Shatrov, R., & Nadtochiy, O. (2024). Agroengineering studies of tillage and harvesting parameters in soybean cultivation. Engineering of Rural Development, 23, 965-970. doi: 10.22616/ERDev.2024.23.TF195.
[7] Nazarenko, I., Bernyk, I., Dedov, O., Rogovskii, I., Ruchynskyi, M., Pereginets, I., & Titova, L. (2021). Research of technical systems of processes of mixing materials. In Dynamic processes in technological technical systems (pp. 57-76). Kharkiv: РС Тесhnology Сеntеr. doi: 10.15587/978-617-7319-49-7.ch4.
[8] Dela Cruz, O.G., Padilla, J.A., & Victoria, A.N. (2021). Managing road traffic accidents: A review on its contributing factors. IOP Conference Series: Earth and Environmental Science, 822(1), article number 012015. doi: 10.1088/1755-1315/822/1/012015.
[9] Rogovskii, I., Lyubarets, B. & Borek, K. (2022). Analyticity of non-stationary processes of change in diagnostic parameters of hydrostatic transmissions of harvesters. Machinery and Energetics, 13(1), 67-76. doi: 10.31548/machenergy2022.01.067.
[10] Volokha, M., Rogovskii, I., Fryshev, S., Sobczuk, H., Virchenko, G., & Yablonskyi, P. (2023). Modeling of transportation process in a technological complex of beet harvesting machines. Journal of Engineering Sciences (Ukraine), 10(2), F1-F9. doi: 10.21272/jes.2023.10(2).f1.
[11] Rogovskii, I.L. (2021). Analyticity of complex criteria for evaluation of grain production in agricultural enterprises intensification of engineering management. Machinery and Energetics, 12(4), 129-138. doi: 10.31548/machenergy2021.04.129.
[12] Rogovskii, I.L. (2021). Rogovskii, I.L. (2021). Influence of operating failure of agricultural machines on efficiency of their machine use. Machinery and Energetics, 12(3), 157-166. doi: 10.31548/machenergy2021.03.157.
[13] Casado-Sanz, N., Guirao, B., & Attard, M. (2020). Analysis of the risk factors affecting the severity of traffic accidents on spanish crosstown roads: the driver’s perspective. Sustainability, 12(6), article number 2237. doi: 10.3390/su12062237.
[14] Rogovskii, I.L. (2021). Rogovskii, I.L. (2021). Models of formation of engineering management alternatives in methods of increasing grain production in agricultural enterprises. Machinery and Energetics, 12(1), 137-146. doi: 10.31548/machenergy2021.01.137.
[15] Abu Dabous, S., Ibrahim, F., Feroz, S., & Alsyouf, I. (2021). Integration of failure mode, effects, and criticality analysis with multi-criteria decision-making in engineering applications: Part I – Manufacturing industry. Engineering Failure Analysis, 122, article number 105264. doi: 10.1016/j.engfailanal.2021.105264.
[16] Rogovskii, I. L. (2021). Resource of removal expenses for strong agricultural period of volume of operations. Machinery and Energetics, 12(2), 123-131. doi: 10.31548/machenergy2021.02.123.
[17] Radu, P.V., Lewandowski, M., & Szelag, A. (2020). On-board and wayside energy storage devices applications in urban transport systems—case study analysis for power applications. Energies, 13(8), article number 2013. doi: 10.3390/en13082013.